Potentiometric studies of dithiooxamide with a sulphide-selective membrane electrode

The sulphide-selective electrode is applicable to the determination of dithiooxamide by titration with silver nitrate. The effect of the alkali content of the solutions on the reaction has been studied. The reaction products are silver sulphide, oxalic acid, and nitric acid. If the alkali concentration of the solution is lower than that equivalent to the acid formed during the titration, the amount of sulphide produced by hydrolysis decreases and the equilibrium potential is established more slowly.The determination is rapid and accurate in the presence of 1 M sodium hydroxide.     

Ion interaction approach to calculations of volumetric properties of aqueous multiple-solute electrolyte solutions

The ion interaction approach developed by Pitzer was used for the prediction of volumetric properties of mixed electrolyte solutions at 25°C based on parameters calculated from experimental data for single-solute electrolyte solutions. Such an approach was shown to be especially effective for application to the calculation of volumetric properties of natural hypersaline brines and of industrial electrolyte solutions of large complexity. The use of the latest recommended sets of volumetric ion interaction parameters for single electrolyte solutions and symmetrical mixing parameters for Na–K–Cl ion combinations considerably improved the precision of the density calculations of highly concentrated mixed electrolyte solutions and of various natural waters.     

Integrated Dust Analysis by Physical Methods

Environmental analyses show that the air which we breathe, and which is so essential to life, is in general a mixture of gaseous, liquid, and solid components. The solid airborne particles, whose concentration, homogeneity, chemical composition, size, and shape can vary over wide ranges, and whose origin may be “natural” or “artificial” are referred to as “dust”. Dust particles can act, inter alia, as condensation nuclei, catalysts, and directly as hazardous materials. Unfortunately, we still know far too little about dust. Dust analysis is extremely difficult and challenging, even for modern analytical chemistry; it is still far from being fully automated. The simultaneous determination of as many “dust parameters” as possible, and particularly the synoptic consideration of all available data against a background of physicochemical and technological knowledge on the development, transformation, and effects of dust, are summarized as “integrated dust analysis”.     

A comparative study of various computational approaches in calculating the structure of pyridoxal 5'-phosphate (PLP)-dependent beta-lyase protein. The importance of protein environment

Various computational approaches, using molecular mechanics (Amber), semiempirical (AM1), density functional (B3LYP), and various ONIOM methods, have been comparatively investigated for the structure of Escherichia coli NifS CsdB protein. The structure of the entire monomer containing 407 amino acid residues and 579 surrounding water molecules has been optimized. The full geometry optimization in the "active site-only" approach (including only active site atoms) has been found to give the largest root-mean-square (RMS) deviation from the X-ray structure; a much better agreement has been achieved by keeping the atoms leading to the backbones of some amino acids frozen in their positions in the X-ray structure. The best agreement has been attained by including the surrounding protein in the calculations using the two-layer ONIOM (B3LYP:Amber) approach. The results presented in this study conclusively demonstrate the importance of the protein/active-site interaction on the active-site structure of the enzyme. The present theoretical study represents the largest system studied at the ONIOM level to date, containing 7992 atoms, including 84 atoms in the QM region and rest in the MM region.     

改进的单纯形优化法用于混合稀土的同时测定

本文应用改进的单纯形优化法较好地弥补了目前在分析化学计量学中得到广泛应用的卡尔曼滤波法所存在的不足，交法应用于混合稀土的同时测定中，获得了满意的结果，结果准确度较卡尔滤波法的有显著的提高。     

紫外光固化超支化聚硅氧烷的合成及其光固化动力学研究

利用γ-甲基丙烯酰氧基丙基三甲基硅氧烷的受控水解反应即A2-B3单体对法来制备超支化聚硅氧烷,并对合成出的聚合物通过FT-IR、1H-NMR和多角度激光光散射技术(MALLS)进行了表征.结果表明,所得聚合物具有超支化结构且分子中含有大量活性官能团,从而可以实现紫外光引发固化.通过等温差示光量热实验(DPC)研究了聚合物结构、引发剂用量、光强度和聚合温度对聚合物光固化行为的影响规律,并得到了其中一种聚合物的光固化动力学参数,光固化反应总级数约为3,表观活化能为16.9kJ/mol.     

天然药物及制剂中微量元素硒的测定方法概况

硒是人体必需的微量元素，具有抗肿瘤、防衰老、防辐射和增强机体免疫力等多种功能。本文就国内近年来对天然药物及其制剂中微量元素硒的分析方法概况作一综述，包括：原子吸收分光光度法、荧光分光光度法、电感耦合等离了光谱法、催化分光光度法、分光光度法、化学发光淬灭法、极谱法、中子活化分析法和色谱法等。     

Direct Identification of the Carbon Skeleton of Organic Compounds using Double Quantum Coherence 13C-NMR Spectroscopy. The INADEQUATE Pulse Sequence

NMR spectroscopy plays an important part in the determination of the structures of organic compounds. The parameters of importance here are the chemical shifts of the ¹H and ¹³C nuclei and the spin-spin interactions both between ¹H nuclei and between ¹H and ¹³C nuclei. Couplings between ¹³C nuclei were almost completely neglected until a few years ago, since they were extremely difficult to observe because of the low natural abundance of ¹³C. However, it is these couplings which afford information directly on the carbon-carbon connectivities in the molecule. It is now possible to use a special NMR pulse sequence to make these couplings more readily visible: the result of using this sequence is a ¹³C-NMR spectrum from which the carbon skeleton concerned can be directly read off. Two-dimensional spectra in particular are very easy to evaluate. The pulse sequence involved, which bears the somewhat puzzling name INADEQUATE, produces double-quantum coherences from which the NMR signals of the coupled carbon nuclei can be obtained. In this article the principle of double-quantum coherence is described and a number of examples for the application of the INADEQUATE pulse sequences to problems in synthetic organic chemistry, biosynthesis and natural products chemistry are presented; in addition, the possibility of applying the INADEQUATE method to other nuclei is considered.     

Chromatography with Supercritical Fluids

Chromatography with supercritical fluids unites the features of both gas chromatography and liquid chromatography, yet retains special characteristics of its own. The diffusion coefficient and particularly the viscosity of fluid phases may approach values for low-pressure gases, while the solvent power may be similar to that of liquids. However, with supercritical fluids it is possible to control chromatographic separations very effectively by pressure programming, since the solubility increases with increasing density. Temperature programming, on the other hand, can have the opposite effect to that in gas- or liquid-chromatography since the density decreases with increasing temperature at a given pressure. Supercritical fluid chromatography is primarily of interest for the separation of higher molecular weight compounds. The efficiency of this method of separation is demonstrated on several homologous series. Thus, a styrene oligomer with nominal M_w=2200 can be resolved by a pressure and temperature program into 40 species.     

Aspects of investigating scrambling in the synthesis of porphyrins: different analytical methods

Herein, we discuss the analyses and quantification of the different components in porphyrin mixtures, prepared from p-anisaldehyde, p-tolualdehyde, and 5-(4-bromophenyl)-dipyrromethane with acid catalysis, using NMR and HPLC. The advantages and disadvantages of these analytical methods are emphasized. Due to the similar size of a bromine atom and a methyl group it was possible to grow crystals suitable for X-ray crystallographic studies from a mixture of porphyrins, where the 4-position of the meso-phenyl rings was either substituted with methyl groups or bromine atoms. We also show that X-ray studies are inferior to NMR analysis for determining the components in a porphyrin mixture.